i7100 24-bit A/D and D/A converters with 256/512 times over sampling for high headroom and resolution Automatically searches for feedback in up to 12 frequencies per channel and intelligently removes it 24 fully programmable Parametric Filters that can be set manually Single-Shot Mode automatically seeks and destroys feedback, locking the filters until manually reset Auto Mode constantly monitors the mix and automatically resets the filters Manual Mode provides each channel with up to 12 fully parametric filters, which include frequency, bandwidth, and gain Single-Shot, Auto, and Parametric filters can be assigned to each individual filter Balanced XLR and 1/4" TRS inputs and outputs A 10-segment LED meter per channel for displaying output levels User friendly operation Immediate display and parameter tuning Most recent changes are automatically stored and kept - even after the power is off Key-locking of device provides security against accidental alteration of settings The i7100 offers 24 feedback filters in two channels. Each filter can be independently set to operate in one of three modes: Single-Shot, Auto, and Parametric. In the Single-Shot mode, each filter is automatically assigned and locked to a feedback frequency until it is manually reset. This mode is best for equalizing systems with stationary microphones where feedback generally occur at only certain fixed frequencies. In the Auto Mode, the filters are dynamically assigned and reassigned to match with varying feedback frequencies. This mode is ideal for systems with mic movements where feedback frequencies tend to vary throughout a program. In Parametric mode, the filters can be manually set to function as a fully parametric EQ, capable of fine adjustments over center frequencies, bandwidth, and gain.