Powerpod 1860 Plus 400W + 400W / 4 Ohms stereo power amplifier (bridgeable and patchable) DFX, our 32/40-bit digital multi-effect processor with 100 programs plus tap control, test tone generator and foot switch on/off jack 8 balanced Mic inputs with inserts Total of 12 Line inputs Two stereo Line input channels capable of accepting RCA/Phone inputs 3-band channel EQ Stereo 7-band graphic EQ Four AUX sends (AUX 1/2 are pre-fader and EFX 1/2 are post-fader) Two stereo AUX returns, each can be routed to AUX 1 & 2 sends (effect to monitor) Stereo RCA I/O for CD/TAPE external sources Grouped +48V real phantom power for broader application Mono output for extra zone filling or as subwoofer processing source PFL on each input and AFL on each output Standby switch to mute Ch1 ~ Ch12 for playing music between sets Zone 2 output for side fill or another PA system Headphone/control room output with rotary level control One professional Speakon-type jack and two 1/4” jacks per channel for speaker connection Rugged metal main chassis with integrated handle Low weight achieved by high-efficiency switching power supply Molded protective cover prevents scratching or damage to mixer Mains power switchable between 115 VAC and 230 VAC The Phonic Powerpod Plus Series of mixers are powered mixers built into a compact and durable molded cabinet. Each Powerpod Plus has a built-in stereo amplifier which is bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. The mixers feature onboard DFX, our own 32/40-bit digital effects processors with 100 preset programs. The 3-band EQ on every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control over your mix.